Cabletron Systems DLE22-MA - Manual (Page 67)

Management Terminal Setup
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-3
5.3 MANAGEMENT TERMINAL SETUP
Use one of the following systems to access Local Management:
• An IBM or compatible PC running a VT series emulation software
package
• A Digital Equipment Corporation VT100 type terminal
• A VT type terminal running emulation programs for the Digital
Equipment Corporation VT100 series
• A remote VT100 type terminal via a modem connection
• In-band via a Telnet connection
5.3.1 Console Cable Connection
Use the Console Cable Kit provided with the DLM6C-AA chassis to
attach the management terminal to the COM port as shown in Figure 5-1.
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the DLE2X-MA and DLE3X-MA as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the DLE2X-MA and DLE3X-MA.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the PC communications port.
[–] Key
This key decreases values from a Local
Management increment field. For example, “Press
[–]” means to press the minus sign key.
DEL Key
The DEL (Delete) key removes characters from a
Local Management field. For example, “Press
DEL” means to press the Delete key.
Table 5-1 Keyboard Conventions