Cabletron Systems DLE22-MA - Manual (Page 68)

Chapter 5: Local Management
5-4 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
Figure 5-1 Management Terminal Connection
5.3.2 Connecting an Uninterruptible Power Supply
(UPS)
If the DLM6C-AA chassis is connected to an American Power
Conversion (APC) UPS for protection from a loss of power, a connection
from the COM port of a module to the UPS can be made to monitor the
status of the UPS. To use the COM port for this purpose, it must be
reconfigured to support the UPS application. This procedure is performed
from the General Configuration screen of the interface module.
Section 5.15.11, Configuring the COM Port, provides detailed
instructions on configuring the COM port for UPS applications. Refer to
the UPS documentation for details on how to access the status
information.
Use the Console Cable Kit provided with the DLM6C-AA chassis to
attach the UPS to the module COM port as shown in Figure 5-2.
Connect the UPS device to the COM port of the DLE2X-MA and
DLE3X-MA as follows:
1. Connect the RJ45 connector at one end of the cable to the COM port
on the DLE2X-MA and DLE3X-MA.
LKG-10867-98F
1 2 3 4 5 PS1 PS2
MultiSwitch 700
TM
TM TM
DLM6C-AA
HA205-AA HA205-AA
H3105-AA
1 2
14 13
25
26
COM
CPU
3 4
5 6
7 8
9 10
11 12
15 16
17 18
19 20
21 22
23 24
DLE22-MA Ethernet
Reserved for FEPIM
Reserved for FEPIM
1 2
COM
CPU
3 4
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
With RJ45 Connectors
PC