Cabletron Systems DLE22-MA - Manual (Page 118)

Chapter 5: Local Management
5-54 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5.17 SNMP TRAPS SCREEN
Since the DLE2X-MA and DLE3X-MA are SNMP compliant devices,
they can send messages to multiple Network Management Stations to
alert users of status changes. The SNMP Traps screen is shown in
Figure 5-22.
Access the SNMP Traps screen from the Module Configuration Menu
screen by using the arrow keys to highlight the SNMP TRAPS field and
pressing ENTER. The SNMP Traps screen displays.
Figure 5-22 SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
It is only necessary to assign SNMP traps if the user desires
the traps to be sent to different addresses than those assigned
in Section 5.9, which details how to set SNMP Traps for the
DLM6C-AA chassis.
Firmware Revision: XX.XX.XX
SNMP Traps
LKG-10852-98F
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
Module Type: DLE22-MA
Slot Number: X
MS 700 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT