Cisco SFS 7008 - Manual (Page 55)

55
Note: all cards in the chassis must have an oper-status of “up” for the upgrade to be effective on all
components.
a.
Select Maintenance > File Management
b. Click the new .img file and click the Install button.
c.
Click Yes when prompted.
d. Repeat for all Server Switches you wish to upgrade.
Figure 4-2: Watching the File Copy Progress
e. Click Ok when the Image Install Completed Successfully message appears.
5. Configure the image for the next boot:
a. Select Maintenance > Boot Config
b. Select the new image from the Image Source drop-down menu and click the Apply button.
Figure 4-3: Set the Boot Config
c. Repeat for all Server Switches you wish to upgrade.