Dell LCD TV W4200 - Manual (Page 14)

14
Setting Up Your TV
www
.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch2e.fm
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
Using the ATSC or NTSC Connector (Coaxial)
1 Turn off the TV and unplug the power cord.
2 Connect the coaxial cable to the ATSC or the NTSC connectors on the TV.
NOTE:
ATSC connector is available only on W4200HD.
3 Plug in the power cord for the TV and turn on the TV.
4 Enter the OSD and select TV for NTSC or Digital TV for ATSC. See "Input Select" on
page 26 for more information.
Using the Composite Connector
1 Turn off the TV and unplug the power cord.
NOTE:
If you are connecting a device that you want to be able to remove, such as a video game system
or a camcorder, use the composite connector on the right side of the TV (see "Right View" on page 6).
2 Connect your device to the TV using the audio and video cable.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the OSD and select AV5 or AV6. See "Input Select" on page 26 for more information.
DZ101_eUM.book Page 14 Friday, October 8, 2004 2:25 PM