Acronis True Image Echo Server for Linux - User Guide User Manual

Page 73

list

filename:[filename]

With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide

with those in the drives/partitions list, if the image does not

contain all the disk partitions. For example, if the image contains

partitions 2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the --

deploy --partition

command cannot find a partition in

the image by its physical number, use --

partition:

the image> --target_partition:

target partition>

keys. For the above example, to restore

partition 2-5 to its original place use:

--partition:2-2 --target partition:2-5.

asz_create

harddisk:X

Specifies the hard disk number where the Acronis Secure Zone

will be created.

partition:[partition
number]

Specifies partitions from which free space will be taken for
Acronis Secure Zone.

size:[ASZ size in sectors |
unallocated]

Sets the Acronis Secure Zone size (in sectors).
If not specified, the size is set as an average between the

maximal (unallocated space plus free space on all partitions
selected with the

partition

option) and minimal (about 35MB)

values.
Either way, the program will first use the unallocated space. If

there is not enough unallocated space, the selected partitions will

be decreased. Resizing of locked partitions requires a reboot.
With “unallocated”, the zone will use all unallocated space on the

disk. Partitions will be moved, if necessary, but not resized.
Moving of locked partitions requires a reboot. The

partition

option is ignored.

asz_activate

Activates the Acronis Startup Recovery Manager. The option will

not take effect if the system partition is resized during Acronis

Secure Zone creation. In that case, use the separate

asz_activate

command.

asz_activate

password:[password]

Sets a password for the Acronis Secure Zone.

asz_delete

partition:[partition
number]

Specifies partitions to which free space will be added after the

Acronis Secure Zone is deleted. If you specify several partitions,

the space will be distributed proportionally to each partition’s size.

clone

harddisk:[disk number]

Specifies a source hard disk which will be cloned to the new hard
disk.

target_harddisk:[disk
number]

Specifies the target hard disk number where the source hard disk

will be cloned.