Acronis True Image Echo Server for Linux - User Guide - Manual (Page 12)

2.3 Running Acronis True Image Echo Server
To run the program under the X Window System interface, use the trueimage command
or select Acronis True Image Echo Server from the system tools menu.
To work in the console mode, use trueimagecmd and trueimagemnt tools, described
in
Chapter 12. Console mode . See also man trueimagecmd or man trueimagemnt.
If your operating system fails to load, you can run Acronis Startup Recovery Manager.
However, this must be activated prior to use; see
3.4 Acronis Startup Recovery Manager
to learn more about this procedure. To run the program, press F11 during the server
bootup, when you see a message that tells you to press that key. Acronis True Image
Echo Server will run in the standalone mode, allowing you to recover the damaged
partitions.
If your disk data is totally corrupted (or if you have not activated Acronis Startup
Recovery Manager), load the bootable Acronis True Image Echo Server version from
removable media (created by you using Rescue Media Builder). Then you will be able to
restore the disk from its previously created image.
2.4 Removing Acronis True Image Echo Server
To remove Acronis True Image Echo Server, do the following:
1. Execute the following commands:
# cd /usr/lib/Acronis/TrueImageServer/uninstall/
# ./uninstall
2. Remove the sources of the SnapAPI module:
# rm -rf /usr/src/snapapi*
12 Copyright © Acronis, Inc., 2000-2007