Baumer BA Scatec10 15 - Manual (Page 37)

User manual Scatec-10 / -15 37 / 44 Baumer Electric AG
Version 2011-03 www.baumer.com Frauenfeld, Switzerland
Sensitivity
Scatec-10: edge thickness 0.1 mm and greater
highest sensitivity 68 … 72 mm beneath sensor
product speed for edge thickness 0.10 mm … 0.2 mm slower than 1 m/s
Scatec-15: edge thickness 0.15 mm and greater
highest sensitivity 97 … 103 mm beneath sensor
product speed for edge thickness 0.15 mm … 0.2 mm slower than 1 m/s
The sensitivity is dependant on distance and product speed.
Typical sensitivity characteristic see diagram below.
11.9 Default values
Operational parameters
see section 9.1 Flow chart for setting the operational parameters
CAN-interface parameters
refer to the Scatec-15 CAN-Manual
0.0
0.2
0.4
0.6
0.8
1.0
1.2
20 30 40 50 60 70 80 90 100 110 120 130
Working distance d [mm]
E
d
g
e
t
h
ic
k
n
e
s
s
k
[
m
m
]
Scatec-10 FLDM 170x1011/S42 Sensitivity
highest
m edium low
How to read the graphics: An edge with thickness k at distance d will typically be detected if the
corresponding point in the graphics is above the curve representing the configured sensitivity level.
Test objects: cleanly trimmed flat matt paper sheet tightly lying on a flat matt white sheet of paper.
typical sensitivity characteristics for object speed < 2m/s