Baumer BA Scatec10 15 - Manual (Page 13)

User manual Scatec-10 / -15 13 / 44 Baumer Electric AG
Version 2011-03 www.baumer.com Frauenfeld, Switzerland
Flow chart for setting the operational parameters
FLDM 170G....
FLDM 170C....
C2 False Pulse
Suppression
0 = off
1 = on
C3 Suppression
Mode
00 dynamic
01 synchronous
02 fixed
03 reflective
C4 Dead Time
[%]
value
18
C7 Encoder A/B
0 = off (A only)
1 = on (A/B)
C8 Dead Time
[ms]
value
20
C9 Pulse Delay
0 = off
1 = on
C10 Pulse Delay
[ms]
value
100
C11 Pulse Delay
[mm]
value
100
C14 Short Pulse
Suppression
0 = off
1 = on
C13 Tail Edge
Suppression
0 = standard
1 = extended
C9 Pulse Delay
0 = off
1 = on
C12 Output at End
of Pulse Train
0 = first
1 = last
C0 Pulse
Length [msec]
value
10.0
Operational
parameters are set !
C Parameters
C1 Running
Direction
0 = leading
1 = trailing
C15 Sensitivity Mode
0 = standard
1 = customized
C16 Sensitivity
Setting
01 high
02 medium
03 low
04 very low
C17 Threshold
value
179
C18 Hysteresis
value
32
Operational
parameters are set !
C5 Encoder
resolution [mm/pulse]
value
1
C6 Dead Path [mm]
value
20
Default values are underlined. In most cases, the default setting will provide good results.
The factory preset default values can be reset anytime in submenu F4.
The names in the flow chart appear on the display as shown in square brackets in the next section.