Baumer TA1200 - Manual (Page 17)

TA1200
www.baumer.com 17
3.2 Inputs and outputs
Signal input
Specification
PNP High level >2.6 V
Low level <2.4 V
Input resistance 1.5 kΩ
NPN High level >2.6 V
Low level <2.4 V
Input resistance 3.9 kΩ
TTL High level >2.6 V
Low level <2.4 V
NAMUR Ion <1 mA, Ioff >3 mA
Input resistance 1.5 kΩ
Magnetic sensor Vin >30 mVeff at 60 Hz
Vin >300 mVeff at 6 kHz
Contact Input resistance 3.9 kΩ
Voltage 10...600 VAC Measuring the frequency of the
voltage
3.3 Voltage supply connection
There are several options for operation supply. Power supply must
be fed in via the recommended external fuse.
Operating voltage External protection
85...265 VAC, (50/60 Hz) and 100...300 VDC M 100 mA
21...53 VAC, (50/60 Hz) and 10.5...70 VDC M 500 mA