Canon SX20 - Manual (Page 53)

53
SETTING
UP FUNCTIONS USING
MENUS
Adjust the total number of horizontal dots.
Increase the total number of dots.
Reduce the total number of dots.
This adjustment is required when
the auto PC adjustment cannot
project images correctly.
Adjusting the Total
Number of Dots
Adjust the tracking when the projected
image flickers due to a tracking error.
Increases the set value.
Decreases the set value.
• This adjustment is required when
the auto PC adjustment cannot
project images correctly.
• The setting is recorded for the
[ANALOG RGB-1] signal and
[ANALOG RGB-2] signal
separately.
Adjusting the
Tracking
Display settings
Input signal settings
Total dots
Display settings
Input signal settings
Tracking
<
>
<
>
<
>