Canon SX20 - Manual (Page 19)

19
BEFORE USE
Input Terminals on Main Unit
1 S-VIDEO IN terminal (P42)
Receives an S-VIDEO signal from AV
equipment.
2 VIDEO IN terminal (P42)
Receives a composite video signal from AV
equipment.
3 DVI-I/RGB IN-1 terminal (P23, 42)
Receives a digital or analog RGB signal from
the computer (DVI terminal).
4 RGB IN-2/COMPONENT IN/RGB OUT
terminal (P23, 42)
Receives an analog RGB signal from the
computer or receives a component picture
signal from AV equipment (mini D-sub 15-pin
terminal).
Also used to output an analog RGB signal by
selecting an option from the menu.
5 SERVICE PORT jack
Exclusively used by the service personnel (it
is not used normally).
6 USB terminal (P41)
Connected to the computer with a USB cable
when the remote control is used as the
mouse of the computer.
7 AUDIO IN terminal (P24, 43)
Receives an audio signal (stereo) from the
computer or AV equipment.
8 Power cord socket (P26)
9 Antitheft lock hole
Allows you to connect an antitheft cable.
1 2 3 4 5 6 7
9 8