Casio MPC-501 - Manual (Page 35)

34
* You can change the trigger time setting using the Power
Management settings under Mobile Cockpit. See page 79 .
• If power does not turn on when you press the power button,
see the
troubleshooting guide on page 105 .
Shutting Down the Power
Power can be turned off using any of the methods listed below.
• Shutting down Windows 98 from the Start menu.
• Entering the Standby Mode from the Start menu.
• Pressing the power switch. (Enters the Hibernation Mode.)
These methods differ in the amount of power consumed while power
is off and the amount of time it takes before Windows 98 is ready to
be used from any of the power off states. An understanding of these
differences will help you decide which one you should use.
Shut down Windows from the Start menu or press the power switch to
enter the Hibernation Mode if you do not plan to use FIVA for a long
time (i.e. until the following day).
Mode
Storage Time Unit Power
Indicator Lamp
for state Recovery Consumption
1Power Off None Long (restart) Almost zero Off
2Standby Memory Fast Yes Flashing
3Hibernation Hard Disk Long Almost zero Off