beautypg.com

Y status indicator – Casio MPC-501 User Manual

Page 33

background image

32

FIVA’s

lamp lights amber when charging starts, and turns green

when charging is complete. If the

lamp goes out during charging,

it can mean that FIVA’s protection circuit has cancelled the charge
operation. If this happens, remove the battery pack from FIVA and
then reattach it to resume charging. The

lamp going out frequently

during charging indicates malfunction, and you should contact your
original dealer or authorized distributor.

With the special charger unit
See the instructions that come with the charger unit for information
about how to charge the battery pack.

Important

• If the battery pack is attached to FIVA, do not unplug the AC

adaptor until the

indicator lamp turns green (full charge). This

helps to extend battery pack life.

• The battery pack requires period replacement. The end of a battery

pack’s service life is indicated when the battery pack powers FIVA
for a relatively short period after a full charge. When this happens,
replace the battery pack with a new one.

• Locate the AC adaptor power cord in a place where it will not be

tripped over.

• Charge the battery pack in an area where the temperature is within

the range of 5

°C to 35°C (41°F to 95°F). The battery pack may fail

to reach a full charge at temperatures outside this range. In this
case the

indicator lamp does not light.

• Charging of a battery pack you have not used for a long time may

not start (the BAT-LED does not light amber) when you connect the
AC adaptor. If this happens, leave the battery pack attached and
hold down the RESET switch on the bottom of FIVA for about 10
seconds.

N o t e

See page 90

for information about battery pack life and charging

capacity.

Battery Indicator Lamp

Green

Amber

Off at start of charge

Off during charge

Meaning

Full charge

Charging

Charging is disabled. Try charging again in an area
where temperature is within allowable range.

Charge was aborted. Remove battery pack from unit
and check it for external abnormality.