Casio MPC-501 - Manual (Page 37)

36
To enter the Standby Mode from the Start menu
1. Tap the Start button on the Taskbar.
2. Choose Shut Down....
3. Tap the option button next to “Stand by” and then tap OK to enter
the Standby Mode.
To restore power, press any key or button.
In the Standby Mode, the LCD and other devices are put into a
suspend state. The status of Windows 98 and any applications that
are running is retained in memory, so they can be restored and used
immediately after leaving the Standby Mode. This means that
Windows 98 is restored within the shortest time from this mode, but it
also means that this mode requires more power consumption than
that of the other two modes. The Standby Mode is best when you plan
to be away from the computer for only a short time and need to
immediately pick up from where you last left off when you return.
Tappling the keyboard or other controls on FIVA automatically
recovers from the Standby Mode.
N o t e
• When you need to leave FIVA on for a long time while using battery
power only, shut down Windows 98 from the Start menu or press
the power switch to enter the Hibernation Mode.
Choose this option.
Choose this command.