To 92) – Sony DSLR-A100 User Manual

Page 92

For details on the operation

To mark all the images

Select [All on card] in [

DPOF set].

Select the number of sheets with v/V on the controller (increases with v and decreases with V).
You cannot separately set the number of images.

Press the center of the controller.
A

(DPOF set) mark appears on all the images, and the screen returns to the menu screen.

• When a DPOF-marked image is played back,

and its number are inserted onto the image.

• If you insert a recording medium that contains DPOF-marked images specified with other cameras into

this camera, then specify images to which to attach a DPOF-mark, the DPOF specifications made with
other cameras are canceled.

You can impose the date onto images when printing images. The position of the date (inside or
outside the image, character size, etc.) depends on your printer.

• Normally, only the date is inserted, however, imposed items may be different depending on the printer.

This function may not be provided, depending on the printer.

You can create an index print of all the images in the folder (Index print). This camera can
specify an index print, as well as frame by frame printing.

• The number of images to print on a sheet and the format depend on the printer. RAW images do not print

in index print.

• The images you shot after setting the index print are not included in the index print. It is recommended

that you create the index print just before printing it.

You can clear the

(DPOF) marks. When you do so, the index print is also canceled. Since

the

(DPOF) marks are left on after printing, it is recommended that you just clear the

marks.

Select [Enter] in [Cancel print].
The message “Cancel all?” appears.

Select [Yes] with b on the controller, then press the center of the controller.
The