Setup menu 3 – Sony DSLR-A100 User Manual
Page 102
102
For details on the operation
1
Setup menu 3
The default settings are marked with
.
During shooting, the recording information display appears on the LCD monitor. You can
change the displayed time of the display.
• The display appears again if you press the shutter button halfway down or perform some other operation.
If you do not operate the camera for given period of time, the camera turns to power saving
mode and almost completely shuts down (Power Save).
t step 3 in “Read This First”
You can set the time to turn the camera to the power save mode.
• Pressing the shutter button returns the camera to the recording mode.
In the default setting, when you press the MENU button, the
1 or
1 menu screen is
displayed first. You can change this setting to display the previously selected menu screen
first.
LCD backlight
1 min.
Displays for one minute.
30 sec.
Displays for 30 seconds.
10 sec.
Displays for 10 seconds.
5 sec.
Displays for five seconds.
Power save
30 min.
The camera turns to power save mode after 30 minutes.
10 min.
The camera turns to power save mode after 10 minutes.
5 min.
The camera turns to power save mode after five minutes.
3 min.
The camera turns to power save mode after three minutes.
1 min.
The camera turns to power save mode after one minute.
MenuSec.Memory
Off
Displays the
1 or
1 menu screen first.
On
Displays the previously selected menu screen first.