HP Laserjet p1606dn - Manual (Page 95)

Table 8-2 Control-panel lights (continued)
Light status Light pattern State of the
product Action
Attention light is blinking, ready
light is on, and other lights are
off.
NOTE: The power button backlight
is on.
The product has
experienced a
continual error from
which it will recover
on its own. To recover from the
error and print the
available data, press
the go button .
If the recovery is
successful, the
product continues to
the processing data
state and completes
the job.
If the recovery is
unsuccessful, the
product continues to
the continuable error
state. Try removing
any media from the
media path and
turning the product
power off, and then
on again.
The attention , ready , and go
lights are on. Toner light is off.
NOTE: The power button backlight
is on.
The product has
experienced a fatal
error from which it
cannot recover. 1. Turn off the
product.
2. Wait
30 seconds,
and then turn on
the product.
3. Wait for the
product to
initialize.
If the error persists,
contact HP customer
support. See
Customer support
on page 118
.
ENWW Interpret control-panel light patterns 83