HP Laserjet p1606dn - Manual (Page 112)

Wrinkles or creases
● Make sure that media is loaded properly.
● Check the media type and quality.
● Turn over the stack of media in the tray. Also, try rotating
the media 180° in the input tray.
● Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59 .
● For envelopes, this can be caused by air pockets inside
the envelope. Remove the envelope, flatten the envelope,
and try printing again.
Toner scatter outline
● If large amounts of toner have scattered around the
characters, the transfer of toner to the media is not
optimal (a small amount of toner scatter is normal for
laser printing). Try a different media type setting in the
printer driver, or use a different media type.
● Turn over the stack of media in the tray.
● Use media that is designed for laser printers.
● Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59 .
100 Chapter 8 Solve problems ENWW