HP Laserjet p1606dn - Manual (Page 94)

Table 8-2 Control-panel lights (continued)
Light status Light pattern State of the
product Action
Ready light is on, and all other
lights are off.
NOTE: The power button backlight
is on.
The product is in the
Ready state. No action required.
The product is ready
to receive a print job.
Ready light is blinking, and all
other lights are off.
NOTE: The power button backlight
is on.
The product is
receiving or
processing data. No action required.
The product is
receiving or
processing a print
job.
To cancel the current
job, press the cancel
button .
Attention light is blinking, and all
other lights are off.
NOTE: The power button backlight
is on.
The product has
experienced an error
that can be corrected
at the product, such
as a jam, an open
door, or the absence
of paper in the
proper tray. Inspect the product,
determine the error,
and then correct the
error. If the error is
the absence of paper
in the proper tray or
the product is in a
manual feed mode,
put the proper paper
in the tray and follow
the onscreen
instructions, or open
and close the print-
cartridge door to
resume printing.
82 Chapter 8 Solve problems ENWW