Bio-Rad Model 550, Ultramark, and Benchmark Microplate Reader Accessories - Manual (Page 17)

4.3 Detailed Operation
Set Analysis Mode
In this series of screens the user chooses single or dual wavelength measurement, assigns
the measurement and reference (for dual wavelength measurement) filters, and selects or des-
elects mixing.
1. Enter the SET ANALYSIS mode by pressing MODE until the display reads
2. Press either ARROW until the display reads
3. Press ENTER. The display will read
4. Dual/Single Wavelength Setting:
a. Use either ARROW to move the cursor under the check box next to D/S.
b. Press SELECT to darken the check box next to D/S.
c. Press ENTER. The display changes to read
d. Use either ARROW to move the cursor under the check box next to the desired
mode.
e. Press SELECT to darken the check box next to the choice.
f. Press ENTER to finalize the selection and the display will return to the previous
screen.
14
>PRINT REPORT
MODE
>SET ANALYSIS
MODE
Set Analysis
■ ■ D/S, ■ ■ Filt and ■ ■ Mix
Select D/S:
■ ■ Dual/ ■ ■ Single
Set Analysis
■ ■ D/S, ■ ■ Filt and ■ ■ Mix