Bio-Rad Sequi-Gen GT Sequencing Cell - Manual (Page 2)

Note
To insure best performance from the Sequi-Gen GT electrophoresis system, become fully acquaint-
ed with these operating instructions before using the cell. Bio-Rad recommends that you first read these
instructions carefully. Then assemble and disassemble the cell completely without casting a gel. After
these preliminary steps, you should be ready to cast and run a gel.
Bio-Rad also recommends that all Sequi-Gen GT components and accessories be inspected for dam-
age, cleaned as recommended in this manual, and rinsed thoroughly with distilled water before use.
Record the following for you records:
Warranty
Bio-Rad Laboratories warrants the Sequi-Gen GT electrophoresis system against defects in
materials and workmanship for 1 year. If any defects occur in the instrument during this warranty peri-
od, Bio-Rad Laboratories will repair or replace the defective parts free. The following defects, howev-
er, are specifically excluded:
1. Defects caused by improper operation
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster
6. Corrosion due to use of improper solvent or sample
This warrant does not apply to parts listed below:
1. Platinum wire
2. Glass plates
For any inquiry or request for repair service, contact Bio-Rad Laboratories after confirming the model
and serial number of your instrument.
Model
Catalog No.
Date of Delivery
Warranty Period
Serial No.
Invoice No.
Purchase Order No.