beautypg.com

Bio-Rad Components for Older Model Spot Cutter User Manual

Page 8

background image

Fig. 5. Right side mounting brackets inside the Enclosure.

3. Using the two large thumbscrews, attach the front light assembly bracket to the front

mounting bracket. Tighten the two thumbscrews by hand.

Fig. 6. Installing the UV light assembly.

4. Repeat steps 1

–3 for the left side light assembly on the left inside of the Enclosure.

5. For each light, plug the UV light assembly power clip into the clip socket in the panel on

the back of the Enclosure. There is one clip socket for each side.

Fig. 7. Clip socket.

Fig. 8. Light assembly plugged into the clip
socket.

5

Front mounting bracket

Mounting screw

Back mounting bracket

See also other documents in the category Bio-Rad Accessories for water: