B&G RemoteVision - Manual (Page 27)

RemoteVision User Manual
Operation
HB-0913-02
23
Wireless
Pair Device allows the unit to establish a Pairing with a
Wireless Port set into Pair mode.
If the unit is already paired this option is replaced with
Unpair Device which allows you to delete a pairing.
In normal use this function is not used.
Compass Setup
Offset – allows correction of an offset in the sensor
reading.
Contrast
The contrast of the RemoteVision display can be set
by scrolling left or right with the NavStick.
Confirm by selecting OK.
The contrast may need to be altered to suit personal
preferences and to correct for significant changes in
environmental conditions.
Status
Status gives various diagnostic information on
Transmission Power, Signal Strength, software
versions etc.