B&G RemoteVision - Manual (Page 10)

RemoteVision User Manual
Operation
HB-0913-02
6
Using your RemoteVision
The following pages describe how to operate the most common features found
on the RemoteVision.
ON Key
• When the unit is OFF: Pressing the ON key will switch
the RemoteVision on
• When the unit is ON: Pressing the ON key will engage
the autopilot (if installed)
OFF Key
• When the unit is ON: Pressing the OFF key will
disengage the autopilot if it is engaged.
• Pressing the OFF key for approximately 2 seconds will
switch the RemoteVision off
NavStick
The NavStick operates in a similar way to a joystick and allows
you to quickly and easily navigate through menus.
The NavStick is controlled with your thumb and may be moved
in five directions:
Up - typically for selecting menu items or entering figures
Down - typically for selecting menu items or entering figures
Left - typically for escaping from a sub-menu
Right - typically for scrolling through page selections
Inwards - for confirming selections
Dodge Left Key
When the autopilot is engaged, press the Dodge Left key to
turn the autopilot to port. Multiple presses are added together.
Dodge Right Key
When the autopilot is engaged, press the Dodge Right key to
turn the autopilot to starboard. Multiple key presses are added
together.
Torch Key
Press and hold the Torch key on the rear of the unit to activate
the torch.
Releasing the key deactivates the torch.