B&G RemoteVision User Manual
Page 16
RemoteVision User Manual
Operation
HB-0913-02
12
Calibration
The RemoteVision has access to all the calibrations, alarms and damping values
from the h2000 instrument system, for specific calibration details consult your
instrument system user manual.
Calibration Example – Standard Calibrations
To calibrate a function, highlight it on a data page – if
the function is not displayed on a data page then you
need to select it as above – press the NavStick to
select.
Highlight CALIBRATE from the menu and press the
NavStick to select.
Use the NavStick to highlight the relevant calibration
value and press the NavStick to select – in the case of
Depth there is only one calibration “DATUM”
Highlight the calibration value, press the NavStick to
enable editing of the value.
Using the NavStick up/down/left/right modify the
calibration value until it is as desired. Press the
NavStick to confirm the value.
Highlight OK and press the NavStick, the calibration
value will be changed and you will return to the
instrument data page.