B&G V90 VHF Radio - Manual (Page 79)

| 79
Setup | V90 Operating Manual
External speaker
You can switch the external speaker ON or OFF.
1. Select MENU → RADIO SETUP → EXT SPEAKER.
2. Scroll to ON or OFF as required, and then press [OK].
Setting the priority channel
US model only.
If you are operating on the USA or Canadian channel banks, you can
set the radio to scan CH16 and CH9 as well as the working channel.
1. Go to menu option RADIO SETUP → WATCH MODE.
2. Select one of the two options:
• 16CH to enable Channel 16 only, or
• 16CH+9CH to enable both Channel 16 and Channel 9.
This setting affects Dual Watch and Tri watch modes.
When watch mode is only channel 16:
• The [16/9] key switches to channel 16.
• Short press [SCAN] enters dual-watch mode.
• Long press [SCAN] scans all available channels.
When watch mode is channel 16 and channel 09:
• Short press the [16/9] key switches to the current priority
channel.
• Long press the [16/9] key toggles the priority channel between
CH16 and CH09.
• Short press [SCAN] enters tri-watch mode.
• Long press [SCAN] scans all available channels.
For further information, see:
• “Priority channels” on page 25.
• “Dual watch scan” on page 36
• “Tri watch scan” on page 37
RADIO SETUP
UNITS
EXT SPEAKER
WATCH MODE
USA
16
Hi
DSC
PRI
WX ALERT
EXT SPEAKER
ON
OFF
Lo
USA
A
16
Hi
DSC
PRI
RADIO SETUP
UNITS
EXT SPEAKER
WATCH MODE USA
16
Hi
DSC
PRI
KEY BEEP
WATCH MODE
ONLY 16CH
16CH+9CH
USA
A
16
Hi
DSC
PRI