B&G V90 VHF Radio - Manual (Page 53)

| 53
DSC procedures | V90 Operating Manual
Calling the MMSI of the last call received
(This will send a ROUTINE, INDIVIDUAL call.)
1. Select DSC MENU → LAST CALL.
2. The display shows the details of the most recent incoming call.
3. Press [OK] to display the “CHOOSE CH” screen.
4. On the “CHOOSE CH” screen, select INTER-SHIP. (Or, select MANUAL
to use a duplex channel—see point 2 of “General usage” on page
51.)
The display shows “SET INTER”
5. Use ▲ or ▼ to reach the working channel you want to specify and
press [OK].
6. When the SEND prompt appears.
• Press [OK] to send the call request on CH70, or
• Press [X] to exit without sending.
7. When you hear the acknowledgement alert tone
• Press the [SILENC] softkey to silence the alert.
• Press [PTT] to commence voice communication.
8. If there is no reply within 30 seconds, the display shows: “SEND
AGAIN?”
You can then select:
• [YES] to send again, or
• [NO] to quit and return to standby mode.
DSC CALL
INDIVIDUAL
LAST CALL
GROUP
ALL SHIPS
USA
C
16
Hi
DSC
PRI
SUNBIRD
INDIVIDUAL
ROUTINE
05:00
USA
C
16
Hi
DSC
PRI
CHOOSE CH:
INTER-SHIP
MANUAL
USA
C
08
Lo
DSC
SUNBIRD
INDIVIDUAL
ROUTINE
SET INTER
Lo
USA
C
08
DSC
SUNBIRD
INDIVIDUAL
ROUTINE
SEND?
Lo
USA
C
08
DSC