B&G V90 VHF Radio - Manual (Page 42)

42 |
Waypoint procedures | V90 Operating Manual
Editing a waypoint
1. Select MENU → WAYPOINT → WP LIST.
The display shows your list of waypoints.
2. Press [OK].
NEW WP starts to flash.
3. Scroll down to the entry you want to edit.
4. While the required waypoint is flashing, press [OK].
5. To edit the waypoint, select WP EDIT.
6. Edit the waypoint name, latitude or longitude. You can press [OK]
repeatedly until the cursor moves to the required place.
7. When finished, press [OK] repeatedly if necessary to reach the SAVE
prompt.
8. Select YES or NO to save the data as required.
Deleting a waypoint
1. Select MENU → WAYPOINT → WP LIST.
The display shows your list of waypoints.
2. Press [OK].
NEW WP starts to flash.
3. Scroll down to the entry you want to delete.
4. While the required waypoint is flashing, press [OK].
5. Select DELETE.
6. If you select YES at the prompt, the waypoint will be deleted
immediately.
WAYPOINT
NEAREST WP
WP LIST
USA
C
16
Hi
DSC
PRI
WP LIST
NEW WP
HARBR
USA
FISH1
FISH2
C
16
Hi
DSC
PRI
HARBR
WP EDIT
DELETE
GO
TX WPT DATA USA
C
16
Hi
DSC
PRI
WAYPOINT
NEAREST WP
WP LIST
USA
C
16
Hi
DSC
PRI
WP LIST
NEW WP
HARBR
USA
FISH1
FISH2
C
16
Hi
DSC
PRI
FISH2
WP EDIT
DELETE
GO
TX WPT DATA
USA
16
Hi
DSC
PRI