B&G V90 VHF Radio - Manual (Page 29)

| 29
Getting started | V90 Operating Manual
Entering data
Entering data with a wired handset
Enter data using the keypad. The first press of a key inputs the
number corresponding to the key; subsequent presses input letters
of the alphabet as indicated on the key. For example, 2, A, B, and C
are typed using the same key.
After a short pause, the cursor automatically jumps to the
next space; or, you can press [OK] to move to the next space
immediately.
¼ Note: Characters can only be entered in upper case.
To replace a character:
• Use the
◄ and ►keys to move the cursor to the character. You can
then type over the character.
To finish entering data:
Press [OK] repeatedly to reach the end of the line. The cursor will
then move to the next input required, or a save/cancel option will
be displayed for you to select as required.
¼ Note: You can press [X] at any time to go back one step.
Entering data with a wireless handset
Use the
▲and ▼keys to scroll through the available characters, and
then press [OK] to select the required character.
Warning messages
See “Appendix 6 - Warning messages” on page 105.
Alert tones
See “Appendix 5 - Beep tones and call alerts” on page 105.