B&G V90 VHF Radio User Manual
Page 68
68 |
DSC procedures |
V90 Operating Manual
Receiving a DSC test call
You can set up the radio to respond to incoming DSC TEST calls with
an automatic response or manual response. To change the option,
see “Setting up DSC test reply” on page 89.
Manual response
1.
On receiving a DSC test request, the radio sounds a two-tone alert.
2.
Press the [SILENC] softkey to silence the alert.
3.
Press the [ACK] softkey to acknowledge the DSC Test Call.
Auto response
•
On receiving a DSC test request, the radio automatically replies after
a 10 second delay with an ACK signal.