B&G V90 VHF Radio - Manual (Page 21)

| 21
Getting started | V90 Operating Manual
Switching on and off
Switching on the system
The VHF radio is switched on from a wired handset.
To switch on the radio:
1. Press and hold [X] on a wired handset until the startup screen
showing version numbers appears.
2. When prompted, press [X] to exit the startup screen and display the
main operating screen.
This switches on the transceiver and the wired handset.
¼ Note: A wireless handset can only switch itself on and off. See
“Switching on a wireless handset” on page 22.
Switching off the system
The system is switched off by holding down the [X] key on a wired
handset until the display shows “Release the key to power off.”
Just one handset
1. In standby mode, press [X] on the wired handset until the display
shows “Release key to power off.”
2. Release the [X] key.
More than one wired handset
HS1 (handset 1) has a power-off menu. All the other handsets
simply power themselves off.
Handset 1 power-off menu:
• SYSTEM
Turns off all handsets and the transceiver.
• HS1
Turns off the handset itself.
Displays “SYSTEM IS WORKING” with no backlight.
¼ Note: You can ignore the power-off menu and keep holding down
[X] until the display shows “Release the key to power off.”