Program – ADS Environmental Services Enigma-hyQ QR 775017 A2 User Manual
Page 38

ADS Enigma/Enigma-Compact/Enigma-hyQ User Manual
34
Program
This initiates programming of either the loggers or the communications case.
Programming involves verifying the synchronization of the loggers’ clocks.
Programming loggers
A confirmation dialog box displays the number of loggers found. Click OK
to continue programming. If the number of loggers displayed is not correct,
clean the optical windows on both the case and the loggers and then restart the
programming sequence.
When programming is complete, the dialog will communicate success. The
following screen confirms that the case contained 4 loggers that were
programmed successfully.
This manual is related to the following products: