Great Plains NTA3007HD Predelivery Manual - Manual (Page 53)

Assembly 49
03/29/2010 166-207Q
Route Hoses
(see Parts Manual section: Hydraulics)
Refer to Figure 87
Hydraulic hoses will be routed through the right bulkhead
and left bulkhead and through the right and left pull
bars (not shown in Figure 87).
IMPORTANT BULKHEAD INFORMATION:
Hoses MUST go in correct holes in each bulkhead.
IMPORTANT PULLBAR INFORMATION:
Hoses MUST be correctly grouped for either the right or left
pullbar.
Hoses must be grouped in a bunch when installing
through each pullbar, it is a tight fitting space.
Bulkheads
Refer to Figure 88
The numbers in thebubbles correspond to the actual
numbers in all the hydraulic illustrations in this manual
and the Parts Manual. See bulkheads in illustrations in
the Parts Manual in the section titled “Hydraulics.”
Left Bulkhead:
1. Wing Fold hydraulic hose
2. Wing Fold hydraulic hose
3. Opener Lift hydraulic hose
4. Opener Lift hydraulic hose
5. Marker hydraulics
6. Marker hydraulics
7. Opener Lift hydraulic hose
8. Opener Lift hydraulic hose
9. Opener Tilt hydraulic hose
10. Opener Tilt hydraulic hose
11. Weight Transfer hydraulic hose
12. Weight Transfer hydraulic hose
Right Bulkhead:
13. Fan hydraulic hose
14. Fan hydraulic hose
15. Transport Hook hydraulic hose
16. Transport Hook hydraulic hose
17. Auger hydraulic hose
Figure 87
Right and Left Bulkheads
31112
1
2 U
D
F
B
L
R
1 2
Figure 88
Right and Left Bulkheads
31138
Right Bulkhead
Left Bulkhead