Great Plains NTA3007HD Predelivery Manual - Manual (Page 25)

Unloading the Racks 21
03/29/2010 166-207Q
PULLBARS
Refer to Figure 35
15. Remove metal banding
securing the end of the
pullbars to the rear end of the tongue (the
tongue is setting upside down for shipping.)
Refer to Figure 36
16. Remove 2 pins
from end of pullbars where they
have been secured to the hitch part of the tongue
(using a bar push the pins from the bottom to push
them out.)
Figure 35
Remove Banding from end of
Pullbars
0302
23
22
21
22
21
22 23
Figure 36
Remove 2 Bolts from Pullbars
0300
24
24
24