Great Plains VARIABLE RATE KIT Operator Manual - Manual (Page 19)

Great Plains Mfg., Inc. Front Parts Installation Instructions 19
6/23/2010 Front Parts 166-263M
Cart/Drill Operation
The air drill previously operated in
“GRAN SEED MONITOR” and/or
“GRAN FERT MONITOR” modes.
With the linear actuators now installed and operating,
you will normally operate in
“GRAN SEED CONTROL” and/or
“GRAN FERT CONTROL” mode.
If it is necessary to revert to manual meter setting, move
the pin from the linear actuator arm back to the crank-
driven arm.
Cart/Drill Maintenance
This update causes no changes to drill maintenance.