Great Plains NP3000A Predelivery Manual - Manual (Page 7)

03/31/2011 Table of Contents Index 407-613Q
Great Plains Manufacturing, Inc. Table of Contents Index 3
Introduction
The 30-Foot Fertilizer Applicator (NP3000) has been
designed with care and built by skilled workers using
quality materials. Proper setup, maintenance, and safe
operating practices will help the customer get years of
satisfactory use from the machine.
This manual will familiarize you with planning, unloading,
and assembly of this applicator. Most operating informa-
tion is contained in the Operator manual.
Models Covered
Description of Unit
The Nutri-Pro
®
NP3000 Applicator is a precision imple-
ment for sub-soil application of conventional liquid fertil-
izer from optional on-board tanks or user-provisioned
tanks. The NP3000 has lift-assist 2-point hitching
Intended Usage
Use the NP3000 to apply conventional liquid fertilizer. Do
not modify Great Plains-provisioned components, or
install aftermarket components, except as authorized or
recommended by Great Plains.
Document Family
The documents delivered with the implement vary by
model and options installed.
NP3000 Documents
Deliver All Documents:
Do not discard any documents, including any not listed on this
page. Implement operation and customer safety rely on having
ALL documents. If any are damaged or appear to be missing,
contact Great Plains for replacement copies.
Using This Manual
This manual will familiarize you with
unloading, assembly and initial
setup of the implement. Read this
manual and follow the recommenda-
tions to help ensure safe and effi-
cient delivery preparation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
NP3000-1230 30-Foot, 11-Row, 30 inch
Figure 1
NP3000 Applicator
31959
U
D
F
B
L
R
R
L
407-613M NP3000 Operator Manual
407-613P NP3000 Parts manual
407-613Q NP3000 Pre-Delivery manual
12-M-43 CDS-John Blue NGP Pump Parts and
Instructional manual
016-0159-831 Raven SCS-450 Installation, Operation
and Service manual
U
D
F
B
L
R