Great Plains NP3000A Predelivery Manual - Manual (Page 31)

03/31/2011 Table of Contents Index 407-613Q
Great Plains Manufacturing, Inc. Table of Contents Index 27
Pre-Delivery Closeout
Stow Spacers
1. Select two sets:
810-242C STROKE CONTROL SPACERS 1 1/8
2. Clip each set around the wire loop on each of the
two lift-assist mounts.
Stow Documents
Place all documents in the Manual-Pak™
1
.
Remove Pre-Assembly Markings
Remove all part tags. Wipe off all grease pencil part
numbers.
Final Inspection
1. Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
2. Check that all grease fittings are in place and lubri-
cated. See “Lubrication and Scheduled Mainte-
nance” in the Operator manual.
3. Check that all safety decals and reflectors are cor-
rectly located and legible. Replace if damaged. See
“Safety Decals” in the Operator manual.
1. Manual-Pak™ is a trademark of Custom-Pak, Inc.
Figure 40
Lift-Assist Spacers
31636
53
2
53
2