SARGENT R8200 with Simpli Roseless Trim - Manual (Page 3)

3
#41 Cylinder is standard for both single & double
cylinder functions for 1-3/4" thick door
NOTE: Trim one-side functions always require an inside
trim assembly which can be used on the inside or outside
of the door
How to Change Function of Lock:
Green catch screw must be located as designated on lock case to create
desired function.
3 locations: One for 05, 37 & 38 function (15 function in unlocked position)
One for 04, 06, 13, 17 & 31 functions
And one for 36 function
Note: When moving green catch screw to 04, 06, 13, 17 & 31 functions,
hub position must be at 45° as shown on lockcase.
*Note: 17 function requires both levers to be rigid. Rotate red
locking piece 90°, so red surface of slide faces back of lockbody.
*See How to Change Hand of Lock, page 4.
36
05
37
38
04 06 13 17 31
CHECK HUB
HUB
Items needed to create each of the following functions:
8200 Mortise Lock
Multi-function Lockbody Options
04, 05, 06, 13, 17, 31, 36, 37, 38
Function
Outside
Lever
Inside
Lever
Trim One
Side Kit
Outside
Cylinder
Inside
Cylinder
Thumb
Turn
04 X X X
05 X X X X
06 X X X
13 X X
15 X X
17 X X X X
31 X X X
36 X X X
37 X X X
38 X X X X U.S. Patent (Pending) No. 5,678,870
Step #10
Attach outside front with two
#8-32 x 1/4" flat head screws
Step #11
Position and secure strike in frame with screws provided
Step #12
Test lock function, both levers and cylinder prior to closing
the door
Outside
of door
A8030:A 4/16/10
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.