SARGENT Degree Key System - Manual (Page 8)

90726:E 4/30/14
Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group com
pany. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite
d.
6
1-800-727-5477 • www sargentlock com
Visual Key Control
Tamper Proof Packaging
Degree ™ Key System Technical Manual
Visual Key Control (Stamping)
To allow for easier key and cylinder identification, SARGENT offers permanent stamping of keys and/or optional cylinder concealed stamping with
industry standard alpha-numeric key set symbols
All DG keys are stamped with key set symbol and “DO NOT DUPLICATE” as standard
All DG master and control keys are stamped with the key set symbol and the key system register # cylinders as standard, (Item B) unless alternate
stamping is requested on the order
Master level keys do not include bitting numbers Master level keys include system register numbers stamped on the first line and the standard visual key
control designations on the second line (Item B)
Change keys have one line for up to 7 characters for key set stamping available for permanent Visual Key Control
• Key and cylinder identified by industry standard alpha-numeric keyset symbols
• Cylinder-slide stamping available on mortise, rim, LFIC and all bored cylinders except for 8-Line and 7600 (Items C, D, & E)
• Core side engraving available for 8-Line and 7600 (Item F)
Tamper Proof Packaging
For the highest level of security for the end user, tamper proof packaging is used on all Degree master keys and key blanks This heat sealed shrink wrap
identified with “SARGENT Sealed For Your Security” provides assurance of the integrity of the factory generated key system
Keyway
Key Set
Example
system
number
Symbol to
identify
factory-cut
key
Example
of keyset
Item C
Item E Item D Item F
Item A Item B
Change (Day)
Key Stamping
Master Level
Key Stamping
PAT. NO. 7,552,608
DO NOT DUPLICATE
AB1
PAT. NO. 7,552,608
DO NOT DUPLICATE