SARGENT Degree Key System - Manual (Page 4)

90726:E 4/30/14
Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group com
pany. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite
d.
2
1-800-727-5477 • www.sargentlock.com
DG1 Key Cuts
Degree ™ Key System Technical Manual
90°
TYP.
(.307)
.054±.001
.2440±.0025
.170±.001TYP.
1 2 3 4 5 6 REFERENCE LINE BOTTOM OF KEY
.271±.0015 (1)
.241±.0015 (2)
.211±.0015 (3)
.181±.0015 (4)
.151±.0015 (5)
.121±.002 (6)
DG1 cuts from Bow to Tip
Bottom Pins (BP)
for DG1- cylinders
Size # Part No. Length
1 DG-0021 231
2 DG-0022 261
3 DG-0023 291
4 DG-0024 321
5 DG-0025 351
6 DG-0026 381
Driver Pins (DP)
for DG1- standard cylinders
Driver Pins (DP) for Bump
Resistance (DG1 Only)
Driver Pins (DP)
for DG2- & DG3- cylinders and
all DG- Large Format
Interchangeable Cores
Size # Part No. Length
1 DG-0051 030
2 DG-0052 060
3 DG-0053 090
4 DG-0054 120
5 DG-0055 150
6 DG-0246 180
7 DG-0247 210
8 DG-0248 240
9 DG-0249 270
Size # Part No. Length
1 DG-0036 120
2 DG-0035 150
3 DG-0034 180
5 DG-0033 210
6 DG-0032 240
7 DG-0031 270
Size # Part No. Length
1 DG-0051 030
2 DG-0052 060
3 DG-0053 090
4 DG-0054 120
5 DG-0045 150
6 DG-0044 180
7 DG-0043 210
8 DG-0042 240
9 DG-0041 270
Master Wafers (MW)
for all DG- series
Control Drivers (CD) for all DG- Large
Format Interchangeable Cores (3 & 4
Chambers)
Size # Part No. Length
1 DG-0051 030
2 DG-0052 060
3 DG-0053 090
4 DG-0054 120
5 DG-0055 150
Size # Part No. Length
1 DG-0051 030
2 DG-0052 060
3 DG-0053 090
4 DG-0054 120
5 DG-0055 150
6 n/a
7 DG-0247 210
8 DG-0248 240
9 DG-0249 270
10 DG-0250 300
11 DG-0251 330