SARGENT Degree Key System - Manual (Page 9)

90726:E 4/30/14
Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group com
pany. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite
d.
7
1-800-727-5477 • www.sargentlock.com
Degree Pin Kits
Degree ™ Key System Technical Manual
437 DG1 Standard Pinning Kit
The 437 DG1 Kit is used to pin DG1 fixed and LFIC cylinders The heavy duty steel kit prevents pins from mixing
The kit includes:
- 100 each of bottom pins sizes 1-6
- 100 each of control drivers sizes 1-11
- 100 each of driver pins sizes 1-9
- 100 each of bump resistant pins sizes 4-9
- 25 sidebar springs part number DG-0059
- 100 KIK spring cover part number 13-1341
- 25 KIL/MRT/RIM/LFIC spring cover DG-0040
- 10 each Sidebar (LFIC only) part number DG-2818
- 100 each compression spring part number DG-0017
- 100 each compression spring (LFIC only) part number DG-0097
- Tweezer
- Degree key gauge
See pages 2 and 3 for individual pin part #s
The kit has additional empty compartments for future upgrades to DG2 and DG3 cylinders
The 437 DGM “Master Kit” has all pins needed for pinning DG1, DG2 and DG3 cylinders
437 DGM Master Pinning Kit
The 437 DGM “Master Kit” includes all pins needed to re-pin DG1, DG2 and DG3 cylinders
Kit includes all the same components as in the 437 DG1 kit, with the additional parts to service DG2
and DG3 cylinders
- 10 each Side bar part number DG 0056
- 25 each slider spring part number DG 0060
- 100 each of Left, Center and Right “Chisel Bottom Pins” sizes 1 thru 6
See pages 2 and 3 for individual part numbers
Cylinder Spray Lubricant
Degree cylinders are mechanical devices and require preventive maintenance At a minimum, Degree
cylinders should be lubricated twice a year; more if installed in extreme installations
Degree cylinders should not be exposed to chemical washes or painted
3 0 oz aerosol part number 18-0070
Cylinder Spray Cleaner/Deicer: 3 0 oz aerosol part number 18-0435