SARGENT 11 Line Lever Lock - Manual (Page 4)

11U65 Outside Lever
Removal
11G38 Classroom Security Function
Lever Installation
Function Specific Directions - Lever Installation
Cylinder Removal (Conventional)
Lever
catch
1. Remove 6 lobe security set screw
2. Insert key and rotate 45° clockwise to release lever catch
3. Depress lever catch and remove lever
Please Note: Removable and interchangeable core cylinders do not require
removing the lever to install. See separate instruction sheet (A7471).
Function Description: Inside lever
is always unlocked. Inside key locks/
unlocks outside lever. When inside key
locks outside lever, outside key retracts
the latchbolt but cannot unlock the
outside lever.
Inside rose is marked with
“Lock” and direction arrows
to indicate locking direction
INSIDE:
Rotate key CLOCKWISE TO LOCK.
Rotate key COUNTER-CLOCKWISE
TO UNLOCK
Inside Outside
OUTSIDE:
Rotate key COUNTER
CLOCKWISE TO LOCK.
Rotate key
CLOCKWISE TO UNLOCK.
1. Remove 6 lobe security set screw
2. Lock outside lever by pushing in button on
inside lever.
3. Rotate slot on outside lever with flat blade screwdriver
45° to release lever catch and hold in place
4. Depress lever catch and remove lever
11
12 13
1. For conventional cylinder, place cylinder into lever. Insert
key and turn 45° CLOCKWISE to align cylinder tailpiece
with deep slot in cam (see slotted cam illustration in step
8). For removable or interchangeable core, see separate
instruction sheet (A7471).
2. Install outside lever. Push on until lever catch engages
Note: If outside lever won't secure in place, rotate key clock-
wise until lever catch is released.
3. Secure with 6 lobe security set screw until flush with
lever surface
4. Install inside lever. On 17 and 30 function, push on until
lever catch engages.
5. Secure with 6 lobe security set screw until flush with
lever surface
6. Complete tightening of two latchbolt screws
7. Check operation of levers and latchbolt before closing door
10
Inside
Outside
4
Inside Sleeve Function Function Description Outside Sleeve
Lock lever by button
05 Entrance/Office
Rotate cam until lever catch button
can be depressed, holding cam in
rotated position
24 Entry
44 Service Station
65 Privacy/Bathroom
04 Storeroom/Closet
Rotate cam until lever catch button can be
depressed, holding cam in rotated position
17 Utility/Asylum
Rotate cam counterclockwise until it stops.
16 Classroom Security/ Apartment Rotate cam until lever catch button can be depressed
30 Communicating
Rotate cam counterclockwise until it stops. Then rotate back 45° until
lever catch button can be depressed.
38 Classroom Security
Rotate cam counterclockwise until
it stops. Then rotate back 45° until
lever catch button can be depressed.
Lock lever by button 54 Dormitory
Rotate cam counterclockwise until it stops. Then rotate back 45° until
lever catch button can be depressed.
See A7608B 50 Hotel/Motel See A7608B
Copyright © 2013 SARGENT Manufacturing. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing is prohibited.
A7469K
For functions not shown proceed to step 10
Scan to see a video of
this installation step.
Scan to see a
video of this
installation step.
Scan to see a
video of this
installation step.
Note: If outside lever remains locked,
rotate key on inside lever 360 degrees
counterclockwise, and then rotate key
on outside lever 360 degrees clockwise.