SARGENT Profile Series Cylindrical Locks - Manual (Page 6)

4
For installation assistance, contact SARGENT at 800-810-WIRE (9473)
Additional Keypad Programming 5
To Disable the RF Receiver:
Depress (up to 3 seconds) the # sign on the keypad until you hear 3 beeps and the yellow LED blinks
continually. RF Receiver is now in program mode.
RF Program Code # Yellow LED double blinks
903 # Yellow LED double blinks
00000 # Yellow LED double blinks
00000 # 3 Beeps & Yellow LED double blinks
# 5 Beeps & Yellow LED goes out
Note: When the RF Receiver has been disabled and an RF signal is detected from
an RF FOB, the lock will beep 5 times (rapidly) to indicate that it is in disabled mode.
To Enable the RF Receiver:
Depress (up to 3 seconds) the # sign on the keypad until you hear 3 beeps and the yellow LED blinks
continually. RF Receiver is now in program mode.
RF Program Code # Yellow LED double blinks
913 # Yellow LED double blinks
00000 # Yellow LED double blinks
00000 # 3 Beeps & Yellow LED double blinks
# 5 Beeps & Yellow LED goes out
To Change the Red LED Actuation Indicator Duration:
Press (up to 3 seconds) the # sign on the keypad until you hear 3 beeps and the yellow LED blinks continually.
RF Receiver is now in program mode.
Note: The Red LED (located on the inside escutcheon) default duration is 10 seconds.
RF Program Code # Yellow LED double blinks
971 # Yellow LED double blinks
Duration (1-99 Seconds) # Yellow LED double blinks
Duration (1-99 Seconds) # 3 Beeps & Yellow LED blinks
# 5 Beeps & Yellow LED goes out
To Delete an RF Technology User:
99 # Master Code * Yellow LED blinks
50 # 1 # User Number (04-500) # Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly
* Yellow LED goes out