Canon SX6 User Manual

Page 43

PROJECTIN

G AN IMAGE

FROM TH

E COMPUT

Selecting an Input Signal

You can select an input signal type.

Select an input signal from the followings:
ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable

(supplied cable)

DIGITAL PC

: Digital signal Connecting with a DVI digital cable

ANALOG PC-2 : Analog signal Connecting with a VGA cable or 5-BNC cable

Select an appropriate input signal before starting the auto setup function by following the
steps below if you change the input signal due to changing the connection to the computer
or so.

Selecting [ANALOG PC-1] or [DIGITAL PC]

Press the [INPUT] button.

The [INPUT] window appears.

Select the top item in the menu with the [INPUT] button.

The selection is toggled through available input signal types from above.

z An LED for a terminal flushes in green if a cable is connected and an input signal is con-

firmed. An LED for a terminal turns on if the projected image is obtained through the termi-
nal.

z Connecting a DVI cable to Input Terminal-1, select the appropriate input signal with the

[INPUT] button in accordance with the setting on the computer (digital signal/analog sig-
nal).

z You can select any input signal type from all options through the [ ] / [ ] button.

This manual is related to the following products:

X600