Canon SX6 - Manual (Page 36)

36
PROJECTIN
G AN IMAGE
FROM TH
E COMPUT
ER
Caution
Connect the Ground Terminal
Connect the ground terminal on the power plug to ground. Otherwise, the operating
computer may suffer electromagnetic radiation problems and poor reception by TV and
radio.
Unplug the Power Cord When the Projector is Not in Use
The projector constantly consumes approximately 7W power even when it is turned off.
To ensure safety, malfunction prevention, and power saving, remove the power plug
from the AC outlet when the projector is not used for an extended period of time.
Selecting a Language
A window appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and so on in the window.
Select your language as shown below.
Select a language with the POINTER buttons and press the [OK] button.
z Focus the projected image before selecting the language if it is out of focus (P46).
z You can change the language from the menu at a later time (P98).
An item highlighted in orange will be selected.