Canon SX6 - Manual (Page 120)

120
APPENDI
X
Glossary
6-axis Color Adjustment (P94)
The color adjustment function for an
advanced user. You can adjust color bal-
ance and color level for 6 axis of RGB (red/
green/blue) and CMY (cyan/magenta/yel-
low) of the projected image to make a fine
color adjustment. You can perform the 6-
axis color adjustment in the image adjust-
ment menu.
AdobeRGB (P50, 89)
A color space specification set up by
Adobe systems Incorporated which is
applied to high performance digital
cameras, displays and others. You can
project an image with more accurate color
reproduction since Its has wider color
gamut than sRGB. In SX6, if you select
[AdobeRGB] in the [Image mode] setting,
the projector can project the best-quality
image conforming to the AdobeRGB
Standard. Please be aware that color of
the projected image may vary with that of
the original image if you project an
AdobeRGB compatible image in sRGB
mode or project an sRGB compatible
image in AdobeRGB mode.
Analog PC (P25, 32, 81)
A signal system used to send analog sig-
nal information of R (red), G (green), and B
(blue). It is a typical system for connecting
a color monitor to a computer. Connect the
analog PC output terminal on the computer
and Input Terminal-1 or Input Terminal-2 on
this projector with a monitor cable. Select
[ANALOG PC-1] for Input Terminal-1 and
[ANALOG PC-2] for Input Terminal-2 at
projection.
Component (P25, 56, 80)
A signal system used to send a color sig-
nal (C) with it divided into a B-Y color dif-
ference signal and an R-Y color difference
signal. This system can project a better-
quality image as compared with the com-
posite signal system. Connect the compo-
nent video terminal on the AV equipment
and the Input Terminal-2 on this projector
with a component cable. Select [COMPO-
NENT] at projection.
Composite (P25, 58)
A video signal system used to send a
brightness signal (Y) and a color signal (C)
together. Connect the composite output
(RCA) terminal on the AV equipment and
the VIDEO IN terminal on this projector
with a video cable. Select [VIDEO] at pro-
jection.
Digital PC (P25, 33)
A signal system used to send digital infor-
mation of individual display dots. This sys-
tem is free from deterioration of image
quality because of no analog conversion.
Connect the DVI output terminal on the
computer and Input Terminal-1 on this pro-
jector with a DVI connection cable. Select
[DIGITAL PC] at projection.
DVI (P33, 43, 57, 61)
A digital video signal connection interface
for a computer and AV equipment. This
interface allows digital data to be transmit-
ted without converting to analog data,
assuring high image quality with no signal
degradation. The DVI-I (integrated) con-
nector can be used to transmit both an
analog video signal and digital video sig-
nal.