Cisco 3800 Series User Manual
Page 38
Required Tools and Equipment for Installation and Maintenance
8
Preinstallation Requirements and Planning for Cisco 3800 Series Routers
OL-5967-01
Required Tools and Equipment for Installation and Maintenance
You need the following tools and equipment to install and upgrade the router and its components:
•
Number 1 and number 2 Phillips screwdrivers
•
Equipment rack and screws to attach router mounting brackets to the rack
•
Wire and wire-crimping tool for connecting the router chassis to earth ground
–
– AWG 6 (13 mm
2
) wire for NEBS-compliant chassis grounding
–
– AWG 14 (2 mm
2
) or larger wire for NEC-compliant chassis grounding
–
– AWG 18 (1 mm
2
) or larger wire for EN/IEC 60950-compliant chassis grounding
•
For NEC-compliant grounding, a ring terminal with an inner diameter of 1/4 inch (5 to 7 mm)
•
Cables for connection to WAN and LAN ports
Note
For information on cables and cable specifications for WAN and LAN ports on network
modules and interface cards, refer to the
, the
, and the
.
•
Console (ASCII terminal or PC running HyperTerminal or similar terminal emulation software)
configured for 9600 bps, 8 data bits, no parity, and 1 stop bit
•
Modem for remote administrative access (optional)
•
ESD-preventive cord and wrist strap for procedures that require access to internal components