Installing compactflash memory cards – Cisco 3800 Series User Manual

Page 105

Installing CompactFlash Memory Cards

Installing CompactFlash Memory Cards in Cisco 3800 Series Routers

OL-5976-01

Figure 47

CompactFlash Slot Location in Cisco 3845 Router

Installing CompactFlash Memory Cards

To install a CompactFlash memory card, follow these steps (see

Figure 46

and

Figure 47

Step 1

Make sure that the ejector button is fully seated so that it does not project from the panel.

Note

If the ejector button projects from the panel, push it in until it clicks.

Step 2

Insert the CompactFlash card into the slot until it is fully seated. The ejector button should remain flush
with the panel.

Note

If the ejector button projects from the panel after you insert the CompactFlash card, remove the
card, press the ejector button until it clicks, and reinsert the card.

Caution

To prevent damage to the ejector mechanism, the ejector bottom must remain fully seated when not
being used to eject a CompactFlash card.

117785

Do Not Remove During Network Operation

COMPACT FLASH

Ejector

button

Compact

Flash slot