beautypg.com

Cisco 3800 Series User Manual

Page 122

background image

92

Installing and Upgrading Internal Components in Cisco 3800 Series Routers

OL-5975-04

AIM Installation and Removal

Figure 59

Plastic Standoff Orientation

Step 5

Insert the connector on the AIM into the connector on the motherboard. Press firmly on the AIM until it
seats onto the connector. The plastic standoff must snap into the hole in the AIM board. See

Figure 60

.

Step 6

Insert the machine-thread metal screws from the accessory kit through the AIM into the metal standoffs.
See

Figure 60

. Carefully tighten the screws with a number 1 Phillips screwdriver.

Step 7

Check that the AIM is installed correctly on the motherboard. See

Figure 60

.

Figure 60

AIM Installed on a Motherboard

82620

AIM end

Locking end

58696

See also other documents in the category Cisco Hardware: